Wall Filling

Dulux Diamond

Description

Usage

For good adhesion and protection of Walls and wood surfaces, it may also be used on dry concrete, masonary etc.

Surface Preparation

New unpainted surfaces:

Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Wall Filling and allow it to dry for 8 hrs.

Previously painted surfaces

Clean the surface by removing all dirt and grease. Remove all loose flaky paint by scraping. For best results apply one coat of Griplac Wall Filling .It will give excellent finish and smooth silky effect.

Ideal Range

A unique blend of luxury and style..., Griplac Paints introduces a brand new paint series of Ideal Range to Enhance the beauty of your surronding with exciting new range of colours..,

Application

NO OF COATS:

Two

COMPOSITION:

Based on poly vinyl acetate.

MIXING RATIO:

Single pack

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Touch dry:

1 Hours

Recoat able:

2 Hours

Hard dry:

8 Hours

APPLICATION :

Brush, Roller.

THINNER :

Cool Water

FILM THICKNESS:

25-30 microns per coat.

Features & Benefits

Better Finish

It is used to overcome the surface defects which at end gives you very fine finish.

No Need for surface preparation again & again

Once you have applied Griplac Wall Filling you can paint again and again without surface making.