Matt Finish

Dulux Diamond

Description

It is formulated to protect Walls, Iron, and Wood which are under extreme conditions in a matt look.

Surface Preparation

New unpainted iron surfaces:

Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Griplac Primer and allow it to dry for 24 hrs

Previously painted iron surfaces:

Clean the surface by removing all dirt and grease. Remove loosely adhering or defective paint. For best results apply one coat of Griplac primer sealer .It will give excellent finish and smooth silky effect.

Wood surfaces

Ensure wood is moisture free. Dry scuff with sand paper. Apply one coat of Griplac under coat and allow it to dry over night. Dry scuff again fill the surface if required and dry scuff once more.

Ideal Range

A unique blend of luxury and style..., Griplac Paints introduces a brand new paint series of Ideal Range to Enhance the beauty of your surronding with exciting new range of colours..,

Application

NO OF COATS:

Two

COMPOSITION:

Based on Alkyd Resion

MIXING RATIO:

Single pack, ready to use after 50% thinning with water.

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Touch dry:

2-3 Hours

Recoat able:

8-12 Hours

Hard dry:

24 Hours

APPLICATION :

Brush, Roller or conventional spray.

THINNER :

Solvent

FILM THICKNESS:

20-25 microns per coat.

Features & Benefits

Easy Application

Formulation results in a smooth finish with no brush or drag marks.

Highly Washable

It is specially formulate for places which are mostly used. It is suitable for places like kitchen and bathroom.

Low VOCs

A low-odour formula that provides better indoor air quality with minimal disruption to occupied areas.