Griplac Matt Finish is a very special formulated paint. It protect Walls, Iron, and Wood which are under extreme conditions and retain their matt look.
Matt Finish
Ideal Range
A unique blend of luxury and style, Griplac Paints introduces a brand new paint series of Ideal Range to Enhance the beauty of your surrounding with exciting new range of colours.
Surface Preparation
Unpainted iron surfaces:
Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Griplac Primer and allow it to dry for 24 hrs.
Previously painted iron surfaces:
Clean the surface by removing all dirt and grease. Remove loosely adhering or defective paint. For best results apply one coat of Griplac primer sealer .It will give excellent finish and smooth silky effect.
Wood surfaces::
Ensure wood is moisture free. Dry scuff with sand paper. Apply one coat of Griplac under coat and allow it to dry over night. Dry scuff again fill the surface if required and dry scuff once more.
Application
No. OF COATS: 2
COMPOSITION: Based on Alkyd Resin
MIXING RATIO: Single pack, ready to use after 50% thinning with water.
DRYING TIMES: Depends on temperature, humidity, air movements & film thickness
Touch dry: 2-3 Hours
Recoatable: 8-12 Hours
Hard dry: 24 Hours
APPLICATION:
Brush 
Roller or 
conventional spray.
THINNER: Solvent
FILM THICKNESS: 20-25 microns per coat.
Features & Benefits
Easy Application
Formulation results in a smooth finish with no brush or drag marks.
Highly Washable
It is specially formulate for places which are mostly used. It is suitable for places like kitchen and bathroom.
Low VOCs
A low-odour formula that provides better indoor air quality with minimal disruption to occupied areas.
Shade Card
Matt Enamel Shade Card
