Griplac Ideal Series Wall Primer is basically use to prepare a new or old surface before applying any emulsion or enamel product.
Wall Primer
Surface Preparation
Unpainted surfaces:
Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Griplac Wall Primer and allow it to dry for 24 hrs.
Priviously Painted Surfaces:
Clean the surface by removing all dirt and grease. Remove loosely adhering or defective paint. For best results apply one coat of Griplac Wall Primer .It will give excellent finish and smooth silky effect.
Wood surfaces:
Ensure wood is moisture free. Dry scuff with sand paper. Apply one coat of Griplac Wall Primer and allow it to dry over night. Dry scuff again fill the surface if required and dry scuff once more.
Application
No. OF COATS: 2
COMPOSITION: Based on MEDIUM OIL alkyd resin and durable pigments.
MIXING RATIO: Single pack.
DRYING TIMES: Depends on temperature, humidity, air movements & film thickness
Surface Dry: 2-3 Hours
Recoatable: 8 Hours
Hard Dry: 24 Hours
APPLICATION: 
Brush or 
conventional spray.
THINNER: Solvent
FILM THICKNESS: 25-30 microns per coat.
Features & Benefits
Economical & Quality Product
A good quality, cost conscious primer for any job.
High-Hiding
Formulated to provide good coverage, reducing the need for multiple coats.
Ideal Range
A unique blend of luxury and style, Griplac Paints introduces a brand new paint series of Ideal Range to Enhance the beauty of your surrounding with exciting new range of colours.
