For good adhesion, protection and water resistant of iron.
Red Oxide Primer
Surface Preparation
Newly unpainted iron surfaces:
Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Red Oxide Primer and allow it to dry for 24 hrs.
Previously painted iron surfaces:
Clean the surface by removing all dirt and grease. Remove all loose flaky paint by scraping. For best results apply one coat of Griplac Wall Filling .It will give excellent finish and smooth silky effect..
Wood surfaces:
Ensure iron is moisture free. To remove grease, wipe with a solvent soaked rage. Dry scuff and smooth the surface with sand paper. Apply one coat of Red Oxide Primer and allow it to dry over night. Dry scuff again fill the surface if required and dry scuff once more.
Application
No. OF COATS: 2
COMPOSITION: Based on long oil alkyd resin and durable pigments.
MIXING RATIO: Single pack, ready to use after 50% thinning with Solvent.
DRYING TIMES: Depends on temperature, humidity, air movements & film thickness
Touch Dry: 2-3 Hours
Recoatable: 8 Hours
Hard Dry: 24 Hours
APPLICATION: 
Brush or 
conventional spray..
THINNER: Solvent
FILM THICKNESS: 25-30 microns per coat.
Features & Benefits
Protection Against Rust:
It is special formulated for metal doors to give them protection against rust.
Ideal Range
A unique blend of luxury and style, Griplac Paints introduces a brand new paint series of Ideal Range to Enhance the beauty of your surrounding with exciting new range of colours.
