Griplac Texture Finish is suitable for exterior & interior use on concrete, Gypsum. Brick and Asbestos surfaces.
Texture Finish
Surface Preparation
New surface must be clean, dry and free from dust, wax, salts and all unwanted material. Remove all defective and poorly adhering material of previously painted Surfaces by rubbing down using abrasive paper and dust off. For large holes and cracks. Use plaster of paris or white cement. Allow to dry. Apply 1-2 coats of Griplac Wall Filling or Acrylic Primer for proper sealing from water & salts and allow to dry. Rub down the surface with abrasive paper and dust off. Apply Griplac Texture Finish with roller. Apply designing roller to create the desired textured look.
Application
No. OF COATS: Two
DRYING TIMES:
Depends on temperature, humidity, air movements & film thickness
Surface dry:3-4 Hours
Hard dry: 12 – 15 Hours
APPLICATION: With Roller
Features & Benefits
Easy Application:
Excellent flow and application properties results in a smooth finish with no brush or drag marks.
Excellent flow and application properties results in a smooth finish with no brush or drag marks.
Excellent Touch-Up:
Blends flawlessly with the previously painted surface to invisibly repair damaged areas.
Ideal Range
A unique blend of luxury and style, Griplac Paints introduces a brand new paint series of Ideal Range to Enhance the beauty of your surrounding with exciting new range of colours.
