GRIPLAC Markless Matt Emulsion is the paint that repels stains. It contains non-stick technology that allows the paint to repel household stains. Any liquid based stain will form into beads and can be easily removed. Your walls stay clean from household stains such as tea, coffee, juices, ink, hand marks, etc.
Markless Matt Emulsion
Surface Preparation
New or Bare Masonry Surfaces:
Bare masonry surfaces should be completely dry and free from dust, dirt and grease. Uses bleach solution to treat the surface affected by fungus. Apply GRIPLAC Acrylic Wall Primer and allow thorough drying. Sand and dust off. Smooth the surface by applying 2-3 coats of GRIPLAC Subtle Filling Putty. Sand and dust off thoroughly. Allow the entire surface to dry completely prior to painting. Avoid paint if the moisture content and alkalinity of the walls is still high.
Previously Painted Surfaces:
Sound Surface: Loose and flaking paint must be scraped off. Defective areas should be sanded and smoothed using abrasive paper or wire brush and dust off. Primed with GRIPLAC Sealer. Fill the surface with GRIPLAC Subtle Filling Putty if necessary.
Severely Defected Surfaces:
Masonry work is recommended to repair large cracks and holes. Allow to dry thoroughly. Prime with GRIPLAC Acrylic Wall Primer. Fill with GRIPLAC Subtle Filling Putty. Scuff to make smooth and dust off thoroughly.
Application
- Stir well before use.
- Application can be done by brush, roller or spray.
- Thin (by volume) up to 30-40% with clean water for brush application, 20-30% for conventional roller application and 30 – 40% for air spray application.
- Clean all equipment with clean water immediately after use.
Drying Time: Touch dry: 30 minutes. (Dependent on temperature and humidity)
Hard dry: 1 hour.
Re-coating Interval : 2-3 hours
Coverage :12-14 sq.m per liter per coat. (May vary depending on the substrates conditions)
No. of Coats : 2-3
For Optimum Results: Apply 1 coat of GRIPLAC Acrylic Wall Primer before applying GRIPLAC Markless Matt Emulsion.
Brush: Brush 30-40%
Roller: 20-30%
Application Thinning Covering Drying Time Thinner
Brush Water Solution 12-14 sq.m/l/ Coat 1 hr. 
Water
Roller Water Solution 10-12 sq.m, Coat 1 hr. Water
Features & Benefits
GRIPLAC Markless Matt Emulsion-the paint that repels stains. It contains non-stick technology that allows the paint to repel household stains. Any liquid based stain will form into beads and can be easily removed. Your walls stay clean from household stains such as tea, coffee, juices, ink, hand marks, etc.
LIGHT FASTNESS
With highly efficient pigments, the colour tones last for longer period.
OUTCLASS WASH-ABILITY
The truly washable matt interior paint. There’s no need to worry, easy to keep clean. It gives walls the ultimate protection to look freshly painted for years.
COVERAGE
Ideal covering capacity under normal conditions.Should be spot-primed prior to painting.
Shade Card
Griplac Paints Markless Shade Card
